Case Logic Wireless Mouse EW-600 - syncing your device

November 2016




Issue


I'm unable to connect my (Case Logic Model EW-600) wireless mouse with my PC!

Solution


Try the following:
  • Locate the 'reset' button on the bottom of the mouse. (Tiny little black button on ours...)
  • Plug in the USB receiver. The blue LED button should light steadily.
  • Turn on the mouse. Hold it near the USB receiver.
  • Push the blue LED button on the receiver, and as it begins flashing slowly, push the reset button on the bottom of the mouse. This should synchronize the mouse and the USB receiver within moments.
  • If the blue LED button on the USB receiver begins flashing very rapidly, the mouse and the USB receiver are communicating, and the mouse should begin to work.
  • If it does not, the battery in the mouse may need to be removed and replaced, then the whole process started again...
  • If it works, you'll probably have to go into Mouse Properties in your Device Manager and adjust the response of the mouse, because the default settings are often positively crazy sensitive!
  • Hope this solves the problem. Cheers!

Note


Solved by Fingle

Related :

This document entitled « Case Logic Wireless Mouse EW-600 - syncing your device » from CCM (ccm.net) is made available under the Creative Commons license. You can copy, modify copies of this page, under the conditions stipulated by the license, as this note appears clearly.