I can connect to the internet but not routerSolved/Closed

Question

Hello,
I have a netgear wireless router CG814WG that is hardwired to my PC. I am connected to the internet and can surf to my hearts content. The problem arises when I try to connect to my router so I can set up the wireless network. every time I go to 192.168.0.1 this is all I get. (I Use Firefox 3...only)

 Connection Interrupted
The connection to the server was reset while the page was loading.
The network link was interrupted while negotiating a connection. Please try again.

minimal_dude · Accepted Answer

Do Windows+R to open the execute box and type cmd /k ipconfig 
 Find the Default Gateway and note your IP. 
 Go to the address bar, put your IP and you are done ;-)

jenifer0703 · Answer

Did you have an installation Cd when you bought the router you must re-configure your router to be able to access internet , Once you have made the setup on 1 pc the router will share the internet connection with the other one


Try this command to check whether all your post is connected to the router

Go to start Run

Type CMD


A dos interface will appear


Then type Ping. your router id

Ping. 168.0. ect..


Check whether the connection is here

Joey · Answer

Many routers will not let you access setup from the wireless connection. Be sure you are hardwired (ethernet cable) to the router when trying to access setup. (This may not be your problem. I didn't see if you indicated whether you were connected wirelessly or not.)

beezy · Answer

hey, try this...power off your router (unplug power from back, discconect the internet from the back of the router, move the ethernet from-ro ur computer to a different port (ex.2 or 3), restart ur PC, wen back on, replug in POWER...then open up internet explorer and try to acces the router then (could be ur typing wrong try 192.168.1.1, routerlogin.net) good luck, once logged in you can reconnect intetrnet

PGB99 · Answer

I had a similar issue.  What fixed it for me was resetting the router to the factory settings.

Flowerlady · Answer

I had the same problem.  I am totally clueless, but luckily have a son with a great brain who was home on leave.  He said something about my DSL modem and the wireless router haveing the same IP address and he had to change one - made it end in 2.0 instead of 1.0 or some such.  This was after 3 hrs or so and emails to his brainy navy friends. (This is what they do for the Navy) Works fine now.  Hope it helps.

Novice · Answer

Hi All,
My problem got solved after I switched off and on the router and choosing a different port for the cable behind the router.Thanks

Michael D · Answer

Best thing to do is to reset your router. Just unplug it for 30 seconds and then plug it back in. Worked for me.

I can connect to the internet but not router

8 responses

Similar discussions

Subscribe To Our Newsletter!