Report

Lost admin password for Windows XP [Solved/Closed]

Ask a question cntrychck31 - Last answered on Sep 2, 2017 at 11:36 AM by Rob
Hello,
I dont remember my admin password for windows xp and I cant boot from a disk because its locked and I think theres also a virus. Please Help!!! I have a Dell Inspiron 1300. Everything is locked and it wont even let me logon.
What can I do that wont cost me a fortune?
Helpful
+16
plus moins
1. Place your Windows XP CD in your cd-rom and start your computer (it's assumed here that your XP CD is bootable - as it should be - and that you have your bios set to boot from CD)
2. Keep your eye on the screen messages for booting to your cd Typically, it will be "Press any key to boot from cd"
3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.

4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now
5. The Licensing Agreement comes next - Press F8 to accept it.
6. The next screen is the Setup screen which gives you the option to do a Repair.

It should read something like "If one of the following Windows XP installations is damaged, Setup can try to repair it"
Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process.
7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.
8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically - you will see a progress bar stating "Your computer will reboot in 15 seconds"
9. During the reboot, do not make the mistake of "pressing any key" to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.
10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.
11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.
12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you've made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).
13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.
Dontlisten- Dec 19, 2014 at 01:55 AM
Thx it erased everything and to reinstall a new windows. Dont listen to this guy. I should have known better.
someone- May 7, 2015 at 12:41 PM
thank, I did it! Ihave done exactly as it is written and that's the only way. so thank you again it was so helpful.
denise- Jul 13, 2017 at 09:36 PM
this was so helpful.The year before last i took my laptop to a specialist how charged me 200 just to retrieve my password. I changed my password and wasn't able to access for a full year so thank you
Reply
Rob- Sep 2, 2017 at 11:36 AM
Sequence is a bit different but it 's the only method that worked amongst a dozen I tried.
Thamks
Reply
Helpful
-3
plus moins
Dear Sir,

Please have the solution from the below link. You will

actually have to use a recovery kit to have the problem

fixed:

Xp recovery console - Forgot Administrator Password

Thank you.

Member requests are more likely to be responded to.

Members can monitor the statuses of their requests from their account pages.

A CCM membership gives you access to additional options.

Not a member yet?

Sign up now. It takes less than a minute and is completely free!