I have a better answer to a solved issu
MaxStart
Posts
339
Registration date
Tuesday March 3, 2015
Status
Moderator
Last seen
July 3, 2015
-
Mar 3, 2015 at 01:53 AM
addseo1118 Posts 2 Registration date Wednesday April 8, 2015 Status Member Last seen April 22, 2015 - Apr 17, 2015 at 02:28 AM
addseo1118 Posts 2 Registration date Wednesday April 8, 2015 Status Member Last seen April 22, 2015 - Apr 17, 2015 at 02:28 AM
2 responses
Ambucias
Posts
47356
Registration date
Monday February 1, 2010
Status
Moderator
Last seen
February 15, 2023
11,170
Mar 3, 2015 at 05:31 AM
Mar 3, 2015 at 05:31 AM
That is normal, it's a "How-to" article, it's not posted in the forum.
addseo1118
Posts
2
Registration date
Wednesday April 8, 2015
Status
Member
Last seen
April 22, 2015
Apr 17, 2015 at 02:28 AM
Apr 17, 2015 at 02:28 AM
I have enjoyed with all conversations here. Thanks for opening minds. Glad to be here with you.
Mar 3, 2015 at 01:05 PM
Mar 3, 2015 at 04:02 PM
But you can comment here and we will certainly take you comments into account for a possible amendment to the article.
Mar 3, 2015 at 05:30 PM
the msi setup solution works for the 32bit version NOT for the 64bit version
you can still take advantage of the setup.exe features and bypass the insert disk 1 issue by doing the steps:
1- open the ISO file using any iso application.
2- extract the setup.ini file and open it in the notepad.
3- Using Notepad, edit the setup.ini file in the installer and add "USE_REMOVABLE_DRIVE=YES" under [SETUP].
Example:
[SETUP]
USE_REMOVABLE_DRIVE=YES
4- save the file and replace the setup.ini in the ISO image.
5- burn it or mount it to a virtual drive.
6- simply run setup.exe
this will make the setup.exe works fine and continue the process.
I tried it and it works perfectly.
thank you.
the source:
https://knowledge.autodesk.com/support/inventor-products/troubleshooting/caas/sfdcarticles/sfdcarticles/Installing-Inventor-from-USB-drive-is-blocked-by-disc-insertion-message.html
Mar 3, 2015 at 05:39 PM
I will make the amendment tomorrow and forward it to you for your blessing.
Your help is very much appreciated and I hope you stick around.
We always need people like you.
Best regards
P.S. Are you related to the regretted Maxwell Smart?
Mar 3, 2015 at 05:48 PM
glad to be at help.