Pendrive not accessible shows insert disk
Closed
artim
-
Aug 28, 2015 at 02:26 AM
KY_WD Posts 2053 Registration date Thursday October 23, 2014 Status Member Last seen February 28, 2017 - Aug 28, 2015 at 09:15 AM
KY_WD Posts 2053 Registration date Thursday October 23, 2014 Status Member Last seen February 28, 2017 - Aug 28, 2015 at 09:15 AM
Related:
- Pendrive not accessible shows insert disk
- Blackmagic disk speed test windows - Download - Diagnosis and monitoring
- Disk boot failure insert system disk - Guide
- Floppy disk fail 40 - Guide
- Working of hard disk with diagram - Guide
- Lenovo password reset without disk - Guide
1 response
KY_WD
Posts
2053
Registration date
Thursday October 23, 2014
Status
Member
Last seen
February 28, 2017
122
Aug 28, 2015 at 09:15 AM
Aug 28, 2015 at 09:15 AM
Hello artim,
Please, follow these steps:
1. Open command prompt
2. Type the following:
attrib -s -h -r X: /*.* / s / d Then hit "Enter" and wait about 30 seconds
Be careful! Respect the spaces between words and script. Change the letter X with that has been assigned to the USB device on your PC (that you can see it in My Computer. It can be anything, depends on each computer.)
3. Finally, browse the flash drive and delete the "RECYCLER" folder and if there is another one called "Autorun" you have to delete that too.
Good luck.
Western Digital representative
Please, follow these steps:
1. Open command prompt
2. Type the following:
attrib -s -h -r X: /*.* / s / d Then hit "Enter" and wait about 30 seconds
Be careful! Respect the spaces between words and script. Change the letter X with that has been assigned to the USB device on your PC (that you can see it in My Computer. It can be anything, depends on each computer.)
3. Finally, browse the flash drive and delete the "RECYCLER" folder and if there is another one called "Autorun" you have to delete that too.
Good luck.
Western Digital representative
