Dell inspiron hangs in between the starting screens
Closed
nayonika
Posts
1
Registration date
Tuesday August 1, 2017
Status
Member
Last seen
August 1, 2017
-
Updated on Aug 1, 2017 at 05:05 AM
Ambucias Posts 47356 Registration date Monday February 1, 2010 Status Moderator Last seen February 15, 2023 - Aug 1, 2017 at 05:19 AM
Ambucias Posts 47356 Registration date Monday February 1, 2010 Status Moderator Last seen February 15, 2023 - Aug 1, 2017 at 05:19 AM
Related:
- Dell inspiron hangs in between the starting screens
- Dell inspiron factory reset - Guide
- Dell support assistant - Download - Cleaning and optimization
- Why is my screen zoomed in - Guide
- Start steam in big picture mode - Guide
- Dell wifi drivers for windows 7 64 bit free download - Download - Drivers
1 response
Ambucias
Posts
47356
Registration date
Monday February 1, 2010
Status
Moderator
Last seen
February 15, 2023
11,171
Aug 1, 2017 at 05:19 AM
Aug 1, 2017 at 05:19 AM
Hi
In your case, to boot in safe mode...
If Windows 10 fails to boot normally three times over, the fourth time it enters by default in an Automatic Repair mode. Using this mode, you can boot into Safe Mode.
1. To trigger the Automatic Repair mode, you must interrupt the normal boot process three consecutive times: use the reset or the power button on your Windows 10 PC to stop it during boot, before it finishes loading Windows 10. If you use the power button, you might have to keep it pressed for at least 4 seconds to force the power off. When your Windows 10 PC enters the Automatic Repair mode, the first thing you see is a screen that tells you that the operating system is “Preparing Automatic Repair.”
2. Wait for Windows 10 to try to make an automatic diagnosis of your PC.
3. Then, on the “Automatic Repair” screen, press the “Advanced options” button.
4. On the next screen, choose Troubleshoot.
5. From there on, follow the path “Troubleshoot -> Advanced options -> Startup Settings -> Restart.” Then, press the 4 or the F4 key on your keyboard boot into minimal Safe Mode, press 5 or F5 to boot into “Safe Mode with Networking,” or press 6 or F6 to go into “Safe Mode with Command Prompt.”
Let me know if you can boot in safe mode with networking.
Good luck
In your case, to boot in safe mode...
If Windows 10 fails to boot normally three times over, the fourth time it enters by default in an Automatic Repair mode. Using this mode, you can boot into Safe Mode.
1. To trigger the Automatic Repair mode, you must interrupt the normal boot process three consecutive times: use the reset or the power button on your Windows 10 PC to stop it during boot, before it finishes loading Windows 10. If you use the power button, you might have to keep it pressed for at least 4 seconds to force the power off. When your Windows 10 PC enters the Automatic Repair mode, the first thing you see is a screen that tells you that the operating system is “Preparing Automatic Repair.”
2. Wait for Windows 10 to try to make an automatic diagnosis of your PC.
3. Then, on the “Automatic Repair” screen, press the “Advanced options” button.
4. On the next screen, choose Troubleshoot.
5. From there on, follow the path “Troubleshoot -> Advanced options -> Startup Settings -> Restart.” Then, press the 4 or the F4 key on your keyboard boot into minimal Safe Mode, press 5 or F5 to boot into “Safe Mode with Networking,” or press 6 or F6 to go into “Safe Mode with Command Prompt.”
Let me know if you can boot in safe mode with networking.
Good luck
