HDM EC122 inwi under Linux

HDM EC122 inwi under Linux

How to use HDM EC122 inwi Under Linux

I just bought a modem ec122 of HDM INWI, I did walk on Linux (Ubuntu 10.04), just:

1 - Install the package "wvdial"
2 - open the file / etc / wvdial.conf (you must open it as root)
3 - add these lines at the end of the file:

Modem = / dev/ttyUSB0
Baud = 230400
SetVolume = 0
Dial Command = ATDT
Init1 = ATZ
FlowControl = Hardware (CRTSCTS)

[Dialer HDM]
Username = wana
Password = wana
Phone = # 777
Stupid Mode = 1
Inherits = Modem3

4 - Save your changes, then open a terminal and type in the command "wvdial HDM" (as root)
5 - It's good, you're now connect


Amended by Sephiroth_Linux
Published by aakai1056. Latest update on December 23, 2010 at 05:05 AM by aakai1056.
This document, titled "HDM EC122 inwi under Linux," is available under the Creative Commons license. Any copy, reuse, or modification of the content should be sufficiently credited to CCM (https://ccm.net/).
Problem with sound on EeePC 701
Automatic shutdown Ubuntu