No signal after windows logo
Solved/Closed
Related:
- No signal after windows logo
- Kmspico windows 10 - Download - Other
- No signal on monitor but cpu running - Guide
- Blackmagic disk speed test windows - Download - Diagnosis and monitoring
- Black screen after windows logo - Guide
- Windows 10 download 64-bit - Download - Windows
1 response
KY_WD
Posts
2053
Registration date
Thursday October 23, 2014
Status
Member
Last seen
February 28, 2017
122
Dec 23, 2015 at 10:43 AM
Dec 23, 2015 at 10:43 AM
Hello deepak,
Have you got a Windows repair CD/USB? If you do I suggest that you try booting from it. In case that you don't have, please try making it on another pc and try to boot from it on your PC.
If you have made modifications of the OS recently, probably you need to roll back to the previous version of Windows.
Hope this will help. Good luck.
Have you got a Windows repair CD/USB? If you do I suggest that you try booting from it. In case that you don't have, please try making it on another pc and try to boot from it on your PC.
If you have made modifications of the OS recently, probably you need to roll back to the previous version of Windows.
Hope this will help. Good luck.
Dec 24, 2015 at 10:43 AM
Dec 29, 2015 at 10:26 AM
If you can't boot with a CD, have you tried with a pendrive? Is it giving you the option to boot from it?
I've read your post once again and there's a thing that I think of and that's the overheating problem. Have you verified that the CPU/GPU coolers are spinning correctly? When did this error occur? Was there any power outage before the crash of the system?
If you have the option, you could clear the CMOS battery by taking it out of the slot and waiting for some minutes the electricity to discharge. Then, plug it back and try to boot your PC.
Good luck.
Dec 29, 2015 at 10:52 AM
I think this problem occured when I switched my computer off without shutting it down
Dec 30, 2015 at 02:40 AM
Then, come and share what happened. :)
Dec 31, 2015 at 09:44 AM