Remove Write Protection From Sandisk Cruzer Blade 16GB

Closed
Samadhan123
Posts
1
Registration date
Thursday January 28, 2016
Status
Member
Last seen
January 28, 2016
- Jan 28, 2016 at 02:30 AM
Hello,
I have tried to remove write protection from my pendrive
i used all the solution but these are not working
Solution A

Click start
then run regedit
go to this directory HKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\
if you can't find StorageDevicePolicies under control folder
then make some new one. Follow this steps:

step 1:
go to this directory HKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\
again and right click control folder

step 2:
select new, then click key and rename the new key #1 folder into
StorageDevicePolicies

step 3:
right click StorageDevicePolicies folder and select new DWORD(32-bit) Value
for 32-bit Operating System and select new DWORD(64-bit) Value
for 64-bit Operating System

step 4:
rename dword newer folder into WriteProtect, then double click WriteProtect
and change the value data into 0 with hexadecimal base, Then close regedit

step 5:
open my computer and refresh it 5 times without do anything to your usb, and
properly eject your flash drive

step 6:
plug in your usb again into your computer and format it using exfat instead of fat32


------------------------------

How to remove a write protection from your USB memory Stick if there is no Write protection ON or OFF button on stick then

1. Shutdown your computer or laptop
2. Insert USB Memory Stick into your laptop or Computer
3. Turn on laptop and then immediately start pressing (F8) key then Advanced Boot Options screen will come up
4. Select Safe Mode with Command Prompt
5. After loading files if your USB Memory Stick drive letter is (G) for example then write as
6. C:\windows\system32>G: and press enter
7. G:\>format G: and press enter
8. If ask you (Y/N) then press (Y) and press enter
9. Now a full format will start which remove write protection from USB Memory Stick.
Note:
Before removing USB from your computer, Always remove it safely by going into to my computer then right click on USB and click eject.


these are the tricks i have tried but its not working.
pzzzzzz..... help me