Ask a question
Forum - Linksys
Hello, How do I find my passphase for my Linksys Router?
Best answer: on the router there should be a reset button hold it in for about 20 sec and release. wait for the lights to come back on and blink appropriately. after doing this connect a lan wire...
Best answer: You don't need to unzip anything. It's a binary file and that's what your router wants. Go to your router interface by typing "192.168.1.1" in your browser. For this model, I think...
Best answer: had the same problem. this fixed it. http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5451
Best answer: I had the same problem and here's how I fixed it. I use Internet Explorer, but the directions should be close for others. Here are the steps in order. Download the latest firmware...
Forum - WiFi
Best answer: first section,second configurations on understand ,but next configuration are doubt
Forum - Network
Best answer: Do Windows+R to open the execute box and type cmd /k ipconfig Find the Default Gateway and note your IP. Go to the address bar, put your IP and you are done ;-)
Best answer: I too had same problem. to resolve the issue follow this procedure Hard reset the router ; Connect to the router with Ethernet Cable ; go to 192.168.1.1 login using admin as userid...
Best answer: Hey, The default IP address to access the router's setup is 192.168.0.1 or 192.168.1.1 Thanks!
Best answer: If I connect the cable directly from the modem to the PC the internet is not dropped. So I do not think it is the modem or the signal.