Cartridge of canon printer
Closed
aparna
-
11 Jul 2010 à 13:16
jack4rall Posts 6428 Registration date Sunday 6 June 2010 Status Moderator Last seen 16 July 2020 - 11 Jul 2010 à 16:34
jack4rall Posts 6428 Registration date Sunday 6 June 2010 Status Moderator Last seen 16 July 2020 - 11 Jul 2010 à 16:34
Related:
- Canon printer forum
- Samsung scx-4521f printer driver download - Download - Drivers
- Canon mp160 driver - Download - Drivers
- Canon f17 1900 printer driver download - Download - Drivers
- Canon lide 25 driver windows 10 - Download - Drivers
- Canon 2900 driver - Download - Drivers
1 response
jack4rall
Posts
6428
Registration date
Sunday 6 June 2010
Status
Moderator
Last seen
16 July 2020
11 Jul 2010 à 16:34
11 Jul 2010 à 16:34
Hi,
Follow these steps to replace the cartridge in canon inkjet printer.
1) Turn on your Canon printer ---->Open the printer's lid ---> Wait a moment --->
The cartridge carrier will automatically disengage.
2) Now put your hand behind the existing ink cartridge ---> pull the cartridge
towards you until it pops out.
3) Now carefully pull the tape off the new cartridge.
4) Now position the new cartridge into the cartridge carrier and make sure it is
facing the correct position.
5) Nowpress the cartridge carrier gently until it clicks into place.
Note : Some cartridges have indicators to demonstrate that they are properly
positioned.
6) Close the printer's lid and try to print a test page to check everything is
working properly.
Follow these steps to replace the cartridge in canon inkjet printer.
1) Turn on your Canon printer ---->Open the printer's lid ---> Wait a moment --->
The cartridge carrier will automatically disengage.
2) Now put your hand behind the existing ink cartridge ---> pull the cartridge
towards you until it pops out.
3) Now carefully pull the tape off the new cartridge.
4) Now position the new cartridge into the cartridge carrier and make sure it is
facing the correct position.
5) Nowpress the cartridge carrier gently until it clicks into place.
Note : Some cartridges have indicators to demonstrate that they are properly
positioned.
6) Close the printer's lid and try to print a test page to check everything is
working properly.
