Computer won't turn on
Closed
Frustrated
-
May 24, 2011 at 07:49 PM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - May 25, 2011 at 11:56 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - May 25, 2011 at 11:56 AM
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
May 25, 2011 at 07:34 AM
May 25, 2011 at 07:34 AM
Hello,
Try this 1
Remove the power cord --> Open the Cabinet --> Remove all the dust from the
cabinet and also from your CPU Cooling Fan --> Remove the RAM from slot, clean
it and place it back properly or try another slot. Check your RAM also, even bad
RAM will result in display problems.
If you are using Graphic Card then remove it and place it back properly.
Good Luck
Try this 1
Remove the power cord --> Open the Cabinet --> Remove all the dust from the
cabinet and also from your CPU Cooling Fan --> Remove the RAM from slot, clean
it and place it back properly or try another slot. Check your RAM also, even bad
RAM will result in display problems.
If you are using Graphic Card then remove it and place it back properly.
Good Luck
May 25, 2011 at 11:17 AM
May 25, 2011 at 11:56 AM
Try this 1
Click on the below hyperlink "RAM". You can see how the RAM looks
RAM
For instructions on how to remove the RAM and place it back, click on the below hyperlink
"Instructions".
Instructions
Refer to "Installing Memory ". You can find all the instructions on how to remove the RAM and placing it back properly.
You need to be careful while removing or installing a RAM. Don't apply too much force. Follow the instructions carefully.
Good Luck