How to install dvd drivers
Closed
ash_garden
Posts
1
Registration date
Saturday April 12, 2014
Status
Member
Last seen
April 12, 2014
-
Apr 12, 2014 at 01:28 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Apr 12, 2014 at 04:00 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Apr 12, 2014 at 04:00 AM
Related:
- How to install dvd drivers
- Kmspico install - Download - Other
- Install md5sum windows - Guide
- Tentacle locker 2 install - Download - Adult games
- Dvd decoder - Download - CD and DVD
- Install tar.gz - Guide
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Apr 12, 2014 at 04:00 AM
Apr 12, 2014 at 04:00 AM
Hello,
Try this 1
The drivers for your DVD-Drive will be installed automatically. First you need
to make sure that is detected and working properly. If it failed to get detected
then check the connections and make sure that its getting detected in BIOS.
Try changing the Data Cable \ Molex Power Connector. If it's a PATA Drive and
you have used the same data cable for both (Hard drive and DVD drive) then
make sure that you set hard drive as master and the other as slave using the
jumper settings. You can find the instructions regarding changing it to
Master\Slave on your drive itself.
Good Luck
Try this 1
The drivers for your DVD-Drive will be installed automatically. First you need
to make sure that is detected and working properly. If it failed to get detected
then check the connections and make sure that its getting detected in BIOS.
Try changing the Data Cable \ Molex Power Connector. If it's a PATA Drive and
you have used the same data cable for both (Hard drive and DVD drive) then
make sure that you set hard drive as master and the other as slave using the
jumper settings. You can find the instructions regarding changing it to
Master\Slave on your drive itself.
Good Luck
