Does my computer support 3.5 or 3 gb ram
Solved/Closed
Anurag
xpcman
- Posts
- 26
- Registration date
- Wednesday August 12, 2009
- Status
- Member
- Last seen
- April 30, 2010
xpcman
- Posts
- 19532
- Registration date
- Wednesday October 8, 2008
- Status
- Contributor
- Last seen
- June 15, 2019
Related:
- Does my computer support 3.5 or 3 gb ram
- Pentim 3 problems RAM not recognised? ✓ - Forum - Hardware
- Gta 5 32 bit 2gb ram - Download
- Gta IV on 2 gb ram,no grapics card and 32 bit.pc ✓ - Forum - GTA
- Pcdj red 5.3 full version free download - Download
- Mobile bookkeeping 4.3.5 app download - Download
1 reply
xpcman
Oct 10, 2009 at 09:54 PM
- Posts
- 19532
- Registration date
- Wednesday October 8, 2008
- Status
- Contributor
- Last seen
- June 15, 2019
Oct 10, 2009 at 09:54 PM
this is from the intel site: it only supports 2 GB
Intel® Desktop Board D845GVFN
System Memory
System Memory Features
The Desktop Board D845GVFN has two DIMM sockets and supports the following memory features:
* 2.5 V (only) 184-pin DDR SDRAM DIMMs with gold-plated contacts
* Unbuffered single-sided or double-sided DIMMs
* Maximum total system memory: 2 GB; minimum total system memory: 64 MB
* DDR333/266/200 MHz SDRAM DIMMs only
* Serial Presence Detect (SPD)
* Suspend to RAM
CAUTION:
Do not use ECC DIMMs with this board. Using ECC DIMMs could damage the board.
Integrator's Notes:
* Registered DIMMs are not supported
* Double-sided x16 DIMMs are not supported
Note:
To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance.
The intel site address:
https://www.intel.com/content/www/us/en/support/products/5510/boards-and-kits/desktop-boards/legacy-intel-desktop-boards/intel-desktop-board-d845gvfn.html
Intel® Desktop Board D845GVFN
System Memory
System Memory Features
The Desktop Board D845GVFN has two DIMM sockets and supports the following memory features:
* 2.5 V (only) 184-pin DDR SDRAM DIMMs with gold-plated contacts
* Unbuffered single-sided or double-sided DIMMs
* Maximum total system memory: 2 GB; minimum total system memory: 64 MB
* DDR333/266/200 MHz SDRAM DIMMs only
* Serial Presence Detect (SPD)
* Suspend to RAM
CAUTION:
Do not use ECC DIMMs with this board. Using ECC DIMMs could damage the board.
Integrator's Notes:
* Registered DIMMs are not supported
* Double-sided x16 DIMMs are not supported
Note:
To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance.
The intel site address:
https://www.intel.com/content/www/us/en/support/products/5510/boards-and-kits/desktop-boards/legacy-intel-desktop-boards/intel-desktop-board-d845gvfn.html