Previous Topic Next Topic

Getway Problem

Closed
sahanawaz Posts 3 Registration date Wednesday December 10, 2008 Status Member Last seen February 17, 2009 - Dec 18, 2008 at 04:03 AM
melodyfive Posts 25 Registration date Saturday September 6, 2008 Status Member Last seen June 10, 2009 - Dec 18, 2008 at 07:36 AM
Hello,


Here are my setting on My PC having 2 Different Lancards:

NIC1 - connected to HUB2 on LAN2
IP Add: 10.23.3.54 (set to have static ip address)
Subnet:255.255.255.0
Gateway:10.23.3.64
this ip connected to over the ERP via WAN connectivity

NIC2 - connected to HUB1 of LAN1 and has internet connection - dsl modem is set to dhcp and provides ip on LAN1 via connection to HUB1

IP Add: 192.168.1.35 (set to obtain ip address)
Gateway:192.168.1.1
DHCP:192.168.1.1
DNS:192.168.1.1
192.168.1.1

My problem is I could not connect to LAN 2 Server having getway add of 10.23.3.64 and could not browse any website either when the two NIC are both enabled. If I disable, for example, the NIC2 then that is the time that I could connect to LAN2 Server and vice versa if I disable the NIC1.

Could there be a way to fix my problem?

I need to connect to LAN2 Server and browse the internet at the same time.

Can my pC have two different gateway at the same time?

Hope anyone could help me on this.

1 response

Answer 1 / 1
melodyfive Posts 25 Registration date Saturday September 6, 2008 Status Member Last seen June 10, 2009 13
Dec 18, 2008 at 07:36 AM
hi
It is impossible to use two gateway at the same time!
the thing that you can do is to set up an alternative gateway.
Please follow below Tips:

>Go to connections properties

>Select "Internet Protocol (TCP /IP )"

>General settings (SET up manually with your most common gateway )

>Click on alternative Configuration and setup your second gateway
0