Previous Topic Next Topic

Hello please some will help my gigabyte ddr2 800mhz

Closed
idencsam Posts 1 Registration date Tuesday December 4, 2012 Status Member Last seen December 4, 2012 - Dec 4, 2012 at 03:54 PM
 deesh - Dec 18, 2012 at 12:18 AM
Hello,
please help some tips how to fix my hardware cpu when i turn on was display 10 seconds and press bios setup the display was vanish after 10 seconds thin was start again. this it was repeatedly there 1 beep thin display just 10 seconds only thin was disappear thin start again after 10 seconds. what are possible cause? i done checked RAM the processor i change dual core or Intel celeron as now using celeron.

Thank you and wait for some tips.

very truly yours,

idencs


Related:

2 responses

Answer 1 / 2
Ambucias Posts 47311 Registration date Monday February 1, 2010 Status Moderator Last seen February 15, 2023 11,166
Dec 4, 2012 at 05:01 PM
Hi

If you heard only one short beep, the problem is linked to your motherboard. It can also mean that you are facing a problem with your system memory (BIOS AWARD)
Answer 2 / 2
deesh
Dec 18, 2012 at 12:18 AM
hello it's deesh have you checked your ram i think if it is a long single beep it is a problem or your ram....so if possible please check your ram may be this will be helpful for your




thanx and regards
please reply

Similar discussions

Motherboard boot screen stuck
RonDanino -
Computertech -

17 responses
Need Drivers for SM Bus Controller
Enzo10 -
bionik -

4 responses
What is compatible with 2GB 2Rx8?
AMayfield -
xpcman -

1 response
BIOS UPDATE
SDRedoy -
HelpiOS -

1 response
System automatically restarts again and again
srinumaneti -
josephkelly -

2 responses