System problem
Closed
debnath
-
Apr 13, 2013 at 06:27 AM
jack4rall
jack4rall
- Posts
- 6428
- Registration date
- Sunday June 6, 2010
- Status
- Moderator
- Last seen
- July 16, 2020
Related:
- System problem
- What cable is used for data transmission systems - Articles
- Operating Systems - MS-DOS - Commands - Articles
- Introduction to UNIX systems - Articles
- Nvidia's Intelligent Car Systems - News
- Microsoft Unveils Low-Cost VR Systems - News
1 reply
jack4rall
Apr 13, 2013 at 04:38 PM
- Posts
- 6428
- Registration date
- Sunday June 6, 2010
- Status
- Moderator
- Last seen
- July 16, 2020
Apr 13, 2013 at 04:38 PM
Hello,
Try this 1
Make sure that the problem is not because of the overheating issue.
Open the cabinet --> Remove the dust --> Carefully remove the heat sink from
the CPU and clean the CPU Fan--> Remove the old thermal compound from the
CPU and from the heat sink --> Apply a little new thermal compound in the middle
of the CPU and place the heat sink back properly.
Make sure that you have removed the dust from the CPU Fan and Heat sink.
Good Luck
Try this 1
Make sure that the problem is not because of the overheating issue.
Open the cabinet --> Remove the dust --> Carefully remove the heat sink from
the CPU and clean the CPU Fan--> Remove the old thermal compound from the
CPU and from the heat sink --> Apply a little new thermal compound in the middle
of the CPU and place the heat sink back properly.
Make sure that you have removed the dust from the CPU Fan and Heat sink.
Good Luck