Bootable flash 2.0 pendrive
Closed
Neel
-
Dec 19, 2010 at 02:41 AM
Ambucias Posts 47310 Registration date Monday February 1, 2010 Status Moderator Last seen February 15, 2023 - Dec 19, 2010 at 05:57 AM
Ambucias Posts 47310 Registration date Monday February 1, 2010 Status Moderator Last seen February 15, 2023 - Dec 19, 2010 at 05:57 AM
Related:
- Bootable flash 2.0 pendrive
- Gta 5 2.0 apk download pc - Download - Action and adventure
- Adobe flash player download - Download - Other
- Windows 7 bootable usb download - Download - Storage
- Flash drive/card tester - Download - Backup and recovery
- Snapchat flash not working - Guide
1 response
Ambucias
Posts
47310
Registration date
Monday February 1, 2010
Status
Moderator
Last seen
February 15, 2023
11,164
Dec 19, 2010 at 05:57 AM
Dec 19, 2010 at 05:57 AM
First of all, you will need:
*A USB key (capacity:1 or 2 GB;)
*A Windows XP CD ( official version )
*A PC with a CD player and a USB key
*And this software WinSetupFromUSB : http://www.datafilehost.com/download-109e97af.html
It will also require that:
*Your USB key is bootable;
*Your machine accepts the boot on your USB key (see in the BIOS);
*Your key is fast enough to avoid delays during installation of the OS;
Installing XP
Once downloaded, run the installation software and follow the installation wizard. At the end of the installation, the software will launch.
*Step 1: Insert your Windows XP CD into the CD ROM drive and click Browse
*Step 2: Enter the destination path on the PC
*Step 3: Select your CD ROM drive where your CD is Windows XP and click OK
*Step 4: Click Refresh and then go on the small arrow just to the left and select the USB key that you used to boot XP
*Step 5: Select Fixed
*Step 6: That everything is ready you can just click on the GO
*Wait for the copying procedure. Then close the software (you are informed when the copy is complete)
*Installing Windows XP
*In a first time you connect the USB to your netBook and go into the BIOS
*Then set your BIOS to boot your PC on USB key;
*Once done, save and restart your PC;
*Here, you'll have two lines in the GRUB menu;
*The first is to select the startup of the installation procedure
*The second line will be for the rest of the installation and the first boot of Windows XP;
*Therefore boot on the USB key until Windows XP is fully installed.
*Follow the installation instructions as for a normal installation
*Now your Windows XP is installed with your USB key!
*A USB key (capacity:1 or 2 GB;)
*A Windows XP CD ( official version )
*A PC with a CD player and a USB key
*And this software WinSetupFromUSB : http://www.datafilehost.com/download-109e97af.html
It will also require that:
*Your USB key is bootable;
*Your machine accepts the boot on your USB key (see in the BIOS);
*Your key is fast enough to avoid delays during installation of the OS;
Installing XP
Once downloaded, run the installation software and follow the installation wizard. At the end of the installation, the software will launch.
*Step 1: Insert your Windows XP CD into the CD ROM drive and click Browse
*Step 2: Enter the destination path on the PC
*Step 3: Select your CD ROM drive where your CD is Windows XP and click OK
*Step 4: Click Refresh and then go on the small arrow just to the left and select the USB key that you used to boot XP
*Step 5: Select Fixed
*Step 6: That everything is ready you can just click on the GO
*Wait for the copying procedure. Then close the software (you are informed when the copy is complete)
*Installing Windows XP
*In a first time you connect the USB to your netBook and go into the BIOS
*Then set your BIOS to boot your PC on USB key;
*Once done, save and restart your PC;
*Here, you'll have two lines in the GRUB menu;
*The first is to select the startup of the installation procedure
*The second line will be for the rest of the installation and the first boot of Windows XP;
*Therefore boot on the USB key until Windows XP is fully installed.
*Follow the installation instructions as for a normal installation
*Now your Windows XP is installed with your USB key!