Monitor goes stand by. . :(
Closed
shax
-
Jan 11, 2011 at 08:33 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jan 11, 2011 at 12:22 PM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jan 11, 2011 at 12:22 PM
Related:
- Monitor goes stand by. . :(
- What is vostfr stand for - Guide
- What does wifi stand for - Guide
- No signal on monitor but cpu running - Guide
- How to use tv as second monitor - Guide
- What does nft stand for - Guide
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Jan 11, 2011 at 12:22 PM
Jan 11, 2011 at 12:22 PM
Hello,
Try this 1
If you want to use the graphic card then go to BIOS and disable the onboard VGA
--> Save the settings and exist from BIOS.
[Note : If you got a problem in getting display from the graphic card and want
enable the onboard VGA then click on the below link and follow the instructions
given in the "Hardware reset".
https://ccm.net/faq/1192-lost-bios-password-resetting-the-bios]
Good Luck
Try this 1
If you want to use the graphic card then go to BIOS and disable the onboard VGA
--> Save the settings and exist from BIOS.
[Note : If you got a problem in getting display from the graphic card and want
enable the onboard VGA then click on the below link and follow the instructions
given in the "Hardware reset".
https://ccm.net/faq/1192-lost-bios-password-resetting-the-bios]
Good Luck
