Previous Topic Next Topic

Nothing diplayed on the screen

Closed
lhamza7 Posts 2 Registration date Tuesday December 29, 2015 Status Member Last seen December 30, 2015 - Dec 29, 2015 at 05:26 PM
lhamza7 Posts 2 Registration date Tuesday December 29, 2015 Status Member Last seen December 30, 2015 - Dec 30, 2015 at 07:55 AM
Hello,
I removed the hard disk of hp G61 and replace it with the hard disk of hp G9. The G9 worked perfectly but i removed the memory to check it and then i replace it smoothly. I put the original hard disk of G9 and i tried to turn it on but nothing diplayed on the screen knowing that the fan and hard disk is working and the capslk is blinking every 2 or 1 second. So what could be the problem please help.
THANK YOU IN ADVANCE.
Related:

1 response

Answer 1 / 1
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Dec 29, 2015 at 11:55 PM
Hello,

Try this 1

If you notice that your CPU fan is running but there is no display on the

the screen, then check your RAM.

Remove the RAM from the slot, clean it and place it back properly or try

another slot.

If you are having two RAMs then remove it, place only one RAM and

check if you are able to get the display. If the problem still exists then

change the slot. If the problem still exists then try the above procedure

with the other RAM.

Good Luck
1
lhamza7 Posts 2 Registration date Tuesday December 29, 2015 Status Member Last seen December 30, 2015
Dec 30, 2015 at 07:55 AM
Thank you ill try in a bit .
0