How to print on the network printer
Closed
koolboyt
Posts
1
Registration date
Friday 16 February 2018
Status
Member
Last seen
16 February 2018
-
16 Feb 2018 à 19:08
apabasyah Posts 1 Registration date Saturday 6 October 2018 Status Member Last seen 9 October 2018 - 9 Oct 2018 à 18:33
apabasyah Posts 1 Registration date Saturday 6 October 2018 Status Member Last seen 9 October 2018 - 9 Oct 2018 à 18:33
Hello Team, good day Team i have successfully set up my workgroup on the wireless router in my office and all the systems are working fine. but im having some issues when it come to printing on the networking printer which i have already shared on the network. i can not print. pls help
Related:
- How to print on the network printer
- Windows network commands - Guide
- How to print from mobile without wifi printer - Guide
- Network error occurred - Guide
- Cannot ping computer on same network - Guide
- How to stop printer from printing - Guide
2 responses
apabasyah
Posts
1
Registration date
Saturday 6 October 2018
Status
Member
Last seen
9 October 2018
9 Oct 2018 à 18:33
9 Oct 2018 à 18:33
HP ENVY 4520 Troubleshooting
Turn off the printer
Make sure the printer power cord connects directly to an electrical outlet and not through a surge protector or power strip.
Close all running programs on your computer, and then shut down the computer.
Turn on the printer.and Turn on the computer.
Check the network and printer connection status and make sure your network is working correctly and the printer is ready for scanning
Make sure the printer is connected to the network. Many routers can operate in both 2.4 GHz and 5.0 GHz frequency bands, but not all HP printers support both bands. Make sure the 2.4 GHz
If the error persists, continue to Run the Print and Scan Doctor or Uninstall and Reinstall the printer software
[https://www.so******************************************
Turn off the printer
Make sure the printer power cord connects directly to an electrical outlet and not through a surge protector or power strip.
Close all running programs on your computer, and then shut down the computer.
Turn on the printer.and Turn on the computer.
Check the network and printer connection status and make sure your network is working correctly and the printer is ready for scanning
Make sure the printer is connected to the network. Many routers can operate in both 2.4 GHz and 5.0 GHz frequency bands, but not all HP printers support both bands. Make sure the 2.4 GHz
If the error persists, continue to Run the Print and Scan Doctor or Uninstall and Reinstall the printer software
[https://www.so******************************************