Technical error 0x00000024 (0x001902fe)
Closed
kishor
-
May 25, 2010 at 04:02 AM
Ambucias Posts 47310 Registration date Monday February 1, 2010 Status Moderator Last seen February 15, 2023 - May 25, 2010 at 05:28 AM
Ambucias Posts 47310 Registration date Monday February 1, 2010 Status Moderator Last seen February 15, 2023 - May 25, 2010 at 05:28 AM
Related:
- Technical error 0x00000024 (0x001902fe)
- Technical locker game - Download - Adult games
- Technical support ps3 error code - Guide
- Network error occurred - Guide
- Technical locker 2 - Download - Adult games
- Cmos checksum error - Guide
3 responses
Dear Kishore,
Please have the solution to the problem from the following address.
https://support.microsoft.com/en-us/help/195857
Thank you.
Please have the solution to the problem from the following address.
https://support.microsoft.com/en-us/help/195857
Thank you.
Ambucias
Posts
47310
Registration date
Monday February 1, 2010
Status
Moderator
Last seen
February 15, 2023
11,163
May 25, 2010 at 05:25 AM
May 25, 2010 at 05:25 AM
Greetings,
You have a problem with the NTFS file manager.
It is due to the IDE controler, your disk or IDE cabling has a failure.
I suggest you check both disk and cabling.
Regards
You have a problem with the NTFS file manager.
It is due to the IDE controler, your disk or IDE cabling has a failure.
I suggest you check both disk and cabling.
Regards
Ambucias
Posts
47310
Registration date
Monday February 1, 2010
Status
Moderator
Last seen
February 15, 2023
11,163
May 25, 2010 at 05:28 AM
May 25, 2010 at 05:28 AM
Further to my previous message...
Please change the HDD mode on Bios cofiguration of your Compaq 510(other Model also)
1. GOTO BIOS ROM Setup by pressing F10 key on keyboard.
2. Goto Advanced Tab and select On Board Devices.
3. Change the Valeu of SATA Hard Drive Native Mode from Enable to Disable.
4. After Disable the value save and exit from BIOS Setup. and continue to boot from Windows XP CD.
Please change the HDD mode on Bios cofiguration of your Compaq 510(other Model also)
1. GOTO BIOS ROM Setup by pressing F10 key on keyboard.
2. Goto Advanced Tab and select On Board Devices.
3. Change the Valeu of SATA Hard Drive Native Mode from Enable to Disable.
4. After Disable the value save and exit from BIOS Setup. and continue to boot from Windows XP CD.
