Help please no start up
Closed
Abi
-
Mar 19, 2012 at 05:32 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Mar 20, 2012 at 02:20 PM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Mar 20, 2012 at 02:20 PM
Related:
- Help please no start up
- How to start a listening party on spotify pc - Guide
- Start up sound changer - Download - Customization
- Start steam in big picture mode - Guide
- Start teamviewer - Guide
- When does winterfest start in fortnite 2023 - Guide
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Mar 20, 2012 at 02:20 PM
Mar 20, 2012 at 02:20 PM
Hello,
Try this 1
1) Place the Windows 7 disc in the drive and boot from it.
When "Press any key to boot from the Windows 7 installation DVD" appears,
press any key to start booting from installation disc.
Note: If you failed to boot from the installation disc then make sure first boot
device is set as CD\DVD Drive.
2) When the language preference appears, click on Next.
3) When "Install Now" appears --> Click on "Repair your computer" found at the
bottom.
4) Click on "Next" --> Select the option "Use recovery tools that can fix problems
starting Windows" and click on "Next" --> When "System Recovery Options"
appear --> Select the option "Command Prompt".
Now enter the following commands one by one.
bootrec /fixmbr ----> Press Enter.
bcdedit /export c:\bcd_backup ----> Press Enter.
C: ----> Press Enter.
Note : Now your prompt changes to C:\>
cd boot ----> Press Enter.
Note : Now your prompt changes to C:\Boot>
attrib bcd -s -h -r ----> Press Enter.
ren bcd bcd.old ----> Press Enter.
bootrec /rebuildbcd ----> Press Enter.
Follow the instructions ---> type exit and press enter --> Click on "Restart".
Good Luck
Try this 1
1) Place the Windows 7 disc in the drive and boot from it.
When "Press any key to boot from the Windows 7 installation DVD" appears,
press any key to start booting from installation disc.
Note: If you failed to boot from the installation disc then make sure first boot
device is set as CD\DVD Drive.
2) When the language preference appears, click on Next.
3) When "Install Now" appears --> Click on "Repair your computer" found at the
bottom.
4) Click on "Next" --> Select the option "Use recovery tools that can fix problems
starting Windows" and click on "Next" --> When "System Recovery Options"
appear --> Select the option "Command Prompt".
Now enter the following commands one by one.
bootrec /fixmbr ----> Press Enter.
bcdedit /export c:\bcd_backup ----> Press Enter.
C: ----> Press Enter.
Note : Now your prompt changes to C:\>
cd boot ----> Press Enter.
Note : Now your prompt changes to C:\Boot>
attrib bcd -s -h -r ----> Press Enter.
ren bcd bcd.old ----> Press Enter.
bootrec /rebuildbcd ----> Press Enter.
Follow the instructions ---> type exit and press enter --> Click on "Restart".
Good Luck
