LG E1942 NOT WORKING

Closed
ilovely Posts 1 Registration date Wednesday March 27, 2013 Status Member Last seen March 27, 2013 - Mar 27, 2013 at 12:08 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Mar 28, 2013 at 02:15 PM
I moved my PC last day so i have to unplug all the wires through my CPU. And when I'm plugging it all back, I checked it all. So I turned on the AVR and then the Monitor. It has the red light when you press it, I thought that it would work fine but it just says "power save mode" like that and then just turn off and the red light was just blinking. I unplugged again all and do the same action but it just repeat. Help pleaseeeeee!!

1 response

jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Mar 28, 2013 at 02:15 PM
Hello,

Try this 1

1) First check all your connections.

2) If you notice that your CPU fan is running but there is no display in the screen,

then remove the RAM from the slot, clean it and place it back properly or try

another slot. Check your RAM also. Even bad RAM will result in display problem.

If you have no idea about RAM, then click on the below hyperlinks "Images".

RAM

Removing a RAM

If you are using a graphic card, then remove it and place it back properly.

Good Luck