Memory card unrecognized problem
Closed
Kavitha_s
Posts
2
Registration date
Thursday July 18, 2013
Status
Member
Last seen
July 19, 2013
-
Jul 18, 2013 at 09:29 AM
div850 Posts 13 Registration date Friday March 11, 2011 Status Member Last seen July 31, 2013 - Jul 31, 2013 at 10:50 AM
div850 Posts 13 Registration date Friday March 11, 2011 Status Member Last seen July 31, 2013 - Jul 31, 2013 at 10:50 AM
Related:
- Memory card unrecognized problem
- Network card - Guide
- Clear virtual memory - Guide
- Flash drive/card tester - Download - Backup and recovery
- Wise memory optimizer - Download - Cleaning and optimization
- Could not complete this operation. there was not enough memory available - Guide
3 responses
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Jul 18, 2013 at 10:16 AM
Jul 18, 2013 at 10:16 AM
Hello,
Try this 1
Go to your memory card manufacture's website --> Check if there is any
format utility provided by them --> Format your memory card using that utility.
Or
Let us know your memory card brand name and its capacity. Also let us know the
"File System" its showing you in Disk Management.
Good Luck
Try this 1
Go to your memory card manufacture's website --> Check if there is any
format utility provided by them --> Format your memory card using that utility.
Or
Let us know your memory card brand name and its capacity. Also let us know the
"File System" its showing you in Disk Management.
Good Luck
Kavitha_s
Posts
2
Registration date
Thursday July 18, 2013
Status
Member
Last seen
July 19, 2013
Jul 19, 2013 at 09:26 AM
Jul 19, 2013 at 09:26 AM
Hi Jack,
Thanks for ur reply. But, no use of that. My memory card capacity is 2GB san Disk Micro SD and while am inserting the memory card it shows 0 bytes in free space and as well as used space.
It's too critical only to solve.
Thanks for ur reply. But, no use of that. My memory card capacity is 2GB san Disk Micro SD and while am inserting the memory card it shows 0 bytes in free space and as well as used space.
It's too critical only to solve.
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Jul 19, 2013 at 01:42 PM
Jul 19, 2013 at 01:42 PM
Hello,
Try this 1
Since you are using a 2GB Micro SD Card, try to format it with the "File System" FAT.
Click on Start --> Run --> Type diskmgmt.msc and press Enter.
"Disk Management" will be opened.
Right-click on your Micro SD Card partition --> Format --> Select the "File System" as FAT and then format it.
Good Luck
Try this 1
Since you are using a 2GB Micro SD Card, try to format it with the "File System" FAT.
Click on Start --> Run --> Type diskmgmt.msc and press Enter.
"Disk Management" will be opened.
Right-click on your Micro SD Card partition --> Format --> Select the "File System" as FAT and then format it.
Good Luck
div850
Posts
13
Registration date
Friday March 11, 2011
Status
Member
Last seen
July 31, 2013
Jul 31, 2013 at 10:50 AM
Jul 31, 2013 at 10:50 AM
maybe this topic will help you...
https://ccm.net/forum/affich-455561-how-can-i-format-pen-drive-using-cmd-prompt
Good Luck
https://ccm.net/forum/affich-455561-how-can-i-format-pen-drive-using-cmd-prompt
Good Luck