I am trying to reset my system from F2

Closed
jen7985 Posts 3 Registration date Wednesday April 23, 2014 Status Member Last seen April 28, 2014 - Apr 23, 2014 at 09:44 PM
jen7985 Posts 3 Registration date Wednesday April 23, 2014 Status Member Last seen April 28, 2014 - Apr 28, 2014 at 12:36 AM
hello i am trying to reset my whole system, passwords and all, and i am on the insydeH20 setup utility and the keys will not move to allow me to do so. what do i do?
Related:

2 responses

jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Apr 25, 2014 at 12:03 PM
Hello,

Try this 1

Try clearing CMOS settings.

Turn OFF your computer --> Remove the Power chord --> Open the cabinet -->

Look for CMOS battery --> After few minutes, place the CMOS battery back on the

motherboard --> Connect your power chord --> Switch ON your PC.

Click on the below hyperlink "CMOS Battery" if you don't have any idea about the

CMOS battery

CMOS Battery

Good Luck
0
jen7985 Posts 3 Registration date Wednesday April 23, 2014 Status Member Last seen April 28, 2014
Apr 26, 2014 at 01:20 AM
i have followed your instructions and it did not work. When I opened the cabinet, there was only one round battery, nothing like the one in the picture of the CMOS. There was an empty spot where it looked like one should be there. Do you have any other suggestions? Thank you for your time.
0
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Apr 26, 2014 at 12:34 PM
Hello,
Try this 1
That round battery is called CMOS battery. Follow the above given instructions for it.
OR let me know your motherboard brand name and model number.
Good Luck
0
jen7985 Posts 3 Registration date Wednesday April 23, 2014 Status Member Last seen April 28, 2014
Apr 28, 2014 at 12:36 AM
the motherboard brand name is Kingston and the model number is 4gb2rx8pc312800s1111f3. I hope this is the right number I am suppose to send you
0