Previous Topic Next Topic

My custom built PC wont restart

Closed
Gurpreet Singh - Sep 13, 2014 at 04:56 PM
Ambucias Posts 47310 Registration date Monday February 1, 2010 Status Moderator Last seen February 15, 2023 - Sep 14, 2014 at 06:27 PM
So I just built my pc by ordering each part online. Everything works fine, the fans, etc. I installed windows 8.1 and got all the windows updates. However, in the process of installing windows, I noticed my pc is not able to restart. When it asked to be restarted, my pc would not turn off but the monitor power reading will start blinking like there is nothing connected to it. So I had to manually hold power button to close it and start it again. I did this throughout the whole process of installing windows and it's updates.

Anyone have any idea of what the problem is? thanks in advance
Related:

1 response

Answer 1 / 1
xpcman Posts 19530 Registration date Wednesday October 8, 2008 Status Contributor Last seen June 15, 2019 1,825
Sep 14, 2014 at 01:09 PM
I would get into the BIOS and change the settings to "safe". If that doesn't work I would check for a BIOS update from the Motherboard manufacturer. But, be VERY careful when you update the BIOS. A miss-step can destroy the BIOS chip. Requiring a replacement chip.

Good Luck
0
Gurpreet Singh
Sep 14, 2014 at 05:42 PM
I updated my bios, but same problem still persists. thanks for the help though
0
Ambucias Posts 47310 Registration date Monday February 1, 2010 Status Moderator Last seen February 15, 2023 11,162
Sep 14, 2014 at 06:27 PM
Thank you for being here W, I was totally stumped.
0