Previous Topic Next Topic

NO DISPLAY WHEN CONNECTED TO VGA CARD

Closed
Eminemram Posts 1 Registration date Wednesday December 2, 2015 Status Member Last seen December 2, 2015 - Dec 2, 2015 at 06:10 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Dec 4, 2015 at 03:48 PM
I used to have a vga card . Now i changed my motherboard and and installed a new vga card zotac geforce 610 gt on my amd sempron processor and when the power is on ,it just shows a blank screen. All black and no further responds . Then i tried connecting to system other than vga with vga onboard , the system still looks same. When i remove vga from system completely and restart it again, system works fine... so is the problem is with brand new vga card or system ?or the system does not support ?

1 response

Answer 1 / 1
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Dec 4, 2015 at 03:48 PM
Hello,

Try this 1

Check your motherboard manual and make sure that your Graphics card is

supported. When you are able to get the display using the Graphics Card

then go to BIOS and disable the Onboard VGA.

Good Luck

Similar discussions

Computer turns on but no display
Lancenz -
Lancenz -

2 responses
No display on monitor, light blinks
Harsh20_4 -
Anonymous -

9 responses
Get an OTP from lost SIM card
FriendlyJackal37 -
boboten -

1 response
Sim card lost how to get otp message without old sim card
Sadik_786110 -
jone_7896 -

2 responses