Unable to memory card fomat it
Closed
srikanth
-
Jan 28, 2017 at 05:59 AM
R2D2_WD Posts 3606 Registration date Monday September 1, 2014 Status Member Last seen February 20, 2017 - Jan 30, 2017 at 04:04 AM
R2D2_WD Posts 3606 Registration date Monday September 1, 2014 Status Member Last seen February 20, 2017 - Jan 30, 2017 at 04:04 AM
Related:
- Unable to memory card fomat it
- Available memory less than 15mb - Guide
- How to clear virtual memory - Guide
- Vgcore out of memory - Hardware Forum
- Unable to load authentication library exiting - Counter Strike (CS) Forum
- Unable to ping computer on same network - Guide
1 response
R2D2_WD
Posts
3606
Registration date
Monday September 1, 2014
Status
Member
Last seen
February 20, 2017
155
Jan 30, 2017 at 04:04 AM
Jan 30, 2017 at 04:04 AM
Hi srikanth,
I advise you to connect the card to a PC and run the Command Prompt as an Administrator. Type the following commands:
Diskpart
List Disk
Select Disk n (n must be the corresponding number of the drive)
Attributes disk clear readonly
Exit
If there was a write protection, now it should be cleared and you may be able to delete files or to format the drive. If the issue still persists, test the device on another PC. Please make sure there is no locking button on the pendrive.
Hope this helps
I advise you to connect the card to a PC and run the Command Prompt as an Administrator. Type the following commands:
Diskpart
List Disk
Select Disk n (n must be the corresponding number of the drive)
Attributes disk clear readonly
Exit
If there was a write protection, now it should be cleared and you may be able to delete files or to format the drive. If the issue still persists, test the device on another PC. Please make sure there is no locking button on the pendrive.
Hope this helps
