16gb kingston pendrive
Closed
deli
-
Feb 4, 2011 at 01:18 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Feb 4, 2011 at 05:11 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Feb 4, 2011 at 05:11 AM
Hello,
after going to cmd and i format my drive but it is saying the type of the file system is raw. please use the FS/switch file to specify the file system you wish to use on this volumn. so pliz help me out with this problem. thanking you once again.
after going to cmd and i format my drive but it is saying the type of the file system is raw. please use the FS/switch file to specify the file system you wish to use on this volumn. so pliz help me out with this problem. thanking you once again.
Related:
- 16gb kingston pendrive
- Kingston format utility - Download - Storage
- Kingston dt50 16gb write protected - Hardware Forum
- How to remove write-protection of USB ✓ - Pen Drive, USB & SD Card Forum
- Sandisk cruzer blade 16gb firmware download - Pen Drive, USB & SD Card Forum
- Kingstone data Traveler 32gb is write protected ✓ - Pen Drive, USB & SD Card Forum
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Feb 4, 2011 at 05:11 AM
Feb 4, 2011 at 05:11 AM
Hello,
Try this 1
Click on Start --> Run --> Type cmd and click on OK.
Command Prompt will be opened.
Here I assume your pen drive letter as G.
Enter this command.
format /FS:FAT32 g:
Press "Enter" and follow the instructions.
Note : Don't forget to replace the letter g with your pen drive drive letter.
If the problem still exists, then try to format your pendrive with "HP USB Disk
Storage Format Tool". Click on the below link and download it.
https://ccm.net/downloads/tools/4639-hp-usb-disk-storage-format-tool/
Good Luck.
Try this 1
Click on Start --> Run --> Type cmd and click on OK.
Command Prompt will be opened.
Here I assume your pen drive letter as G.
Enter this command.
format /FS:FAT32 g:
Press "Enter" and follow the instructions.
Note : Don't forget to replace the letter g with your pen drive drive letter.
If the problem still exists, then try to format your pendrive with "HP USB Disk
Storage Format Tool". Click on the below link and download it.
https://ccm.net/downloads/tools/4639-hp-usb-disk-storage-format-tool/
Good Luck.
