Toshiba Satellite restore factory setting
Closed
jamadar
-
Jun 27, 2012 at 03:34 AM
Ambucias
Ambucias
- Posts
- 47363
- Registration date
- Monday February 1, 2010
- Status
- Moderator
- Last seen
- September 1, 2021
Related:
- Toshiba Satellite restore factory setting
- Toshiba satellite restore factory settings ✓ - Forum - Laptop
- Restore toshiba satellite to factory settings - Guide
- Toshiba windows vista 2007 factory reset ✓ - Forum - Laptop
- Toshiba Satellite C75 factory settings ✓ - Forum - Laptop
- Restoring Toshiba laptop to factory settings ✓ - Forum - Laptop
1 reply
Ambucias
Jun 27, 2012 at 04:48 AM
- Posts
- 47363
- Registration date
- Monday February 1, 2010
- Status
- Moderator
- Last seen
- September 1, 2021
Jun 27, 2012 at 04:48 AM
Hello
Follow these instructions:
* 1) Hold down the power button for 10 (ten) seconds to switch off your machine.
Please note: Holding down the power button on the machine forces it to switch off. Any unsaved data will be lost.
* 2) Press and hold the 0 (zero) key and at the same time, tap the power button once to switch on your notebook.
* 3) When the machine Starts beeping; release the 0 key.
* 4) When prompted by the warning screen; select Yes to continue with the system recovery.
* 5) Select Recovery of Factory Default Software; click Next.
* 6) Select Recover to out-of-box state. Click Next again.
* 7) Click Next to Start recovery.
PS:ALL DATA WILL BE ERASED ON YOUR HARD DRIVE IF YOU PROCEED. YOU WILL NEED TO ENSURE THAT YOU HAVE THE POWER ADAPTER PLUGGED IN. DO NOT SWITCH OFF OR RESTART YOUR COMPUTER DURING THIS PROCESS.
Follow these instructions:
* 1) Hold down the power button for 10 (ten) seconds to switch off your machine.
Please note: Holding down the power button on the machine forces it to switch off. Any unsaved data will be lost.
* 2) Press and hold the 0 (zero) key and at the same time, tap the power button once to switch on your notebook.
* 3) When the machine Starts beeping; release the 0 key.
* 4) When prompted by the warning screen; select Yes to continue with the system recovery.
* 5) Select Recovery of Factory Default Software; click Next.
* 6) Select Recover to out-of-box state. Click Next again.
* 7) Click Next to Start recovery.
PS:ALL DATA WILL BE ERASED ON YOUR HARD DRIVE IF YOU PROCEED. YOU WILL NEED TO ENSURE THAT YOU HAVE THE POWER ADAPTER PLUGGED IN. DO NOT SWITCH OFF OR RESTART YOUR COMPUTER DURING THIS PROCESS.