Macro to highlight cells. [Solved/Closed]

Report
Posts
2
Registration date
Tuesday April 30, 2013
Status
Member
Last seen
May 13, 2013
-
steveo0707
Posts
2
Registration date
Tuesday April 30, 2013
Status
Member
Last seen
May 13, 2013
-
I am very new to VBA and have spent countless hours looking for help on the web.

I have a worksheet with 100,000 rows(locations) and 34 columns(Channels).

I need a code to test for 5 levels of criteria.

Level 1 and Level 2 I have figured how to get the cells highlighted.

I cannot figure out how to get it to highlight the cells for Level 3, 4 and 5.

Level 1 highlights the cells green when the MF signal is <= 25 and US Thickness is >=9.0

Level 2 highlights the cells yellow when the MF signal is > 25 and < 90 and US Thickness is < 9.

Level 3 needs to scan the data for level 2 conditions for both MF and US in adjacent cells (up,down,side to side, and diagonally) and highlight those cells light orange.

Level 4 scans for Level 2 conditions for both MF and US for the same channel and location and highlight those cells bright orange.

Level 5 checks for multiple level 4 events in adjacent locations and highlight cells red.

1 reply

Posts
4475
Registration date
Thursday January 28, 2010
Status
Contributor
Last seen
January 6, 2016
756
Is it possible to get a sample sheet posted at some public file share site and you posting a sample book to show what you want to do
1
Thank you

A few words of thanks would be greatly appreciated. Add comment

CCM 5185 users have said thank you to us this month

steveo0707
Posts
2
Registration date
Tuesday April 30, 2013
Status
Member
Last seen
May 13, 2013

Hello rizviasa1,

Sorry it took so long to get back to you. I have been super busy with work and school. I was able to get this problem figured out. Thank you for your response.

Thank you for your time!

Sincerely,

Stephen Meiring