Printer spooler service is not running
Closed
chandrasekharreniguntla
Posts
1
Registration date
Wednesday May 29, 2013
Status
Member
Last seen
May 29, 2013
-
May 29, 2013 at 02:19 AM
chandra - May 30, 2013 at 09:42 AM
chandra - May 30, 2013 at 09:42 AM
Related:
- Printer spooler service is not running
- No signal on monitor but cpu running - Guide
- Windows xp service pack 3 - Download - Windows
- Free fire service - Guide
- Parts inside your printer are at the end of their service life - Guide
- Hp printer app - Download - Other
2 responses
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
May 29, 2013 at 09:37 AM
May 29, 2013 at 09:37 AM
Hello,
Try this 1
Click on Start --> In search box, type services.msc and press Enter.
[If you are using Windows XP then Click on Start --> Run --> Type services.msc
and press Enter]
"Services" window will be opened.
At the right-side, scroll-down for the service "Print Spooler".
Make sure that its Status is "Started" and Startup Type is set to "Automatic".
If its not started or set to automatic then double-click on the "Print Spooler"
service, set Startup type to "Automatic" from the drop-down menu and
click on the "Start" button --> Click on OK.
Good Luck
Try this 1
Click on Start --> In search box, type services.msc and press Enter.
[If you are using Windows XP then Click on Start --> Run --> Type services.msc
and press Enter]
"Services" window will be opened.
At the right-side, scroll-down for the service "Print Spooler".
Make sure that its Status is "Started" and Startup Type is set to "Automatic".
If its not started or set to automatic then double-click on the "Print Spooler"
service, set Startup type to "Automatic" from the drop-down menu and
click on the "Start" button --> Click on OK.
Good Luck
i follow your suggestions yet printers are not worked. when boot device 1-[sata:ps-wdc wd1600]&boot device2-[cd/dvd:ss-hl-dt-st]this condition printers worked.when i take three prints,bootdevice2, are changed automatically(boot device comand1 changed to boot device2). that time printers are not worked
