Pen drive gives error: please insert a disk into removable disk

Closed

Vishal - Jan 18, 2016 at 03:40 AM
R2D2_WD Posts 3606 Registration date Monday September 1, 2014 Status Member Last seen February 20, 2017 - Jan 3, 2017 at 06:28 AM

Hello,

I Have Moserbaer 8 GB Pen drive Whenever I insert the into the computer,it gives me the message "Please insert removable disk in to the drive" ,but, the drive is already inserted.

Pen drive gives error: please insert a disk into removable disk
Wd drive unlock - Guide
Network error occurred - Guide
How to remove write protection from pen drive - Guide
Flash drive/card tester - Download - Backup and recovery
Cmos checksum error - Guide

1 response

Answer 1 / 1

R2D2_WD Posts 3606 Registration date Monday September 1, 2014 Status Member Last seen February 20, 2017 155
Jan 18, 2016 at 03:50 AM

Hi Vishal,

I recommend you to open Device Manager and search for the device under USB devices. Uninstall it, restart the PC and plug the pen drive back in. Please confirm if the error appears when the device is connected to another PC. I strongly recommend you to update your anti virus and do a complete check. For more suggestions, please check the link below.
https://www.tomshardware.com/

Hope this helps

wasifa_fatima Posts 1 Registration date Monday January 2, 2017 Status Member Last seen January 2, 2017
Jan 2, 2017 at 10:53 AM

will doing this delete my files in the pen drive?

R2D2_WD Posts 3606 Registration date Monday September 1, 2014 Status Member Last seen February 20, 2017 155 > wasifa_fatima Posts 1 Registration date Monday January 2, 2017 Status Member Last seen January 2, 2017
Jan 3, 2017 at 06:28 AM

Uninstalling the drive from Device Manager does not affect the data stored on the drive. Those drivers should be automatically reinstalled when you restart the PC and plug the drive back in. The same process happens when you connect the drive to a PC for the first time. It may be worth it to try this method because sometimes solves similar issues.
Another thing to try is running the Command Prompt and typing the following command:
Chdkdsk L: /r

Replace the L with the drive’s letter.

Similar discussions

Corel Draw: Error Reading file problem

SanDisk cruzer blade 16GB not recognising...

SanDisk cruzer Blade 16GB software

Similar discussions

Subscribe To Our Newsletter!