Previous Topic Next Topic

USB SD Card Reader Issue

Closed
passion4tech Posts 16 Registration date Sunday July 3, 2016 Status Member Last seen May 21, 2017 - Jul 26, 2016 at 10:29 AM
R2D2_WD Posts 3606 Registration date Monday September 1, 2014 Status Member Last seen February 20, 2017   - Jul 27, 2016 at 04:00 AM
I have a Kingston MobileLite G4. I have encountered a problem with the front usb port on my case or motherboard not sure. I have to plug in the mobilelite g4 a couple times to get the computer to recognize it then it gives me a message "This Device can perform faster" USB Mass storage. Which is strange because I am 100% sure I'm plugging into usb 3.0 port and the mobilelite g4 is usb 3.0 device. The problem only happens in front usb ports of the case. When I plug the mobilelite g4 in rear usb 3.0 ports I don't get Device can perform faster message. I never had a problem before with the usb 3.0 port until now recently. I tried updating to latest usb 3.0 drivers still no luck
:(


My system specs

Case: Enermax Ostrog GT ATX Mid Tower ECA3280A-BR

CPU: i7 4790K

Motherboard: Asus Z97 Deluxe

Ram: 16GB

Hard Drives: 1 TB HDD and 256 GB SSD PNY

Power Supply: EVGA 650 G2

Video Card: Sapphire Vapor X R9 290 4GB

OS: Windows 7 64Bit

Water Cooler: Corsair H105

Monitor: Acer H257HU



Related:

1 response

Answer 1 / 1
R2D2_WD Posts 3606 Registration date Monday September 1, 2014 Status Member Last seen February 20, 2017   155
Jul 27, 2016 at 04:00 AM
Hi Passion4tech,

Have you noticed if you actually get lower transfer speed when connecting to the frontal port? If there is no change in speeds, I would suggest you to ignore the message or disable it from Device Manager – Universal Serial Bus controller – Properties.
If all drivers are updated and you see speed issues when using the frontal ports, the problem may be cable related. Sometimes case cables cause similar issues. Depending on the case model, these cables might be replaced.

Hope this helps

0