Previous Topic Next Topic

M/c power on but no display no beep on it

Closed
yoggi - Sep 25, 2008 at 12:48 AM
melodyfive Posts 25 Registration date Saturday September 6, 2008 Status Member Last seen June 10, 2009 - Sep 25, 2008 at 04:50 AM
Hello,
my machine powered on but no display ,no beep on it. Ican check cmos battery , RAM ,Replaced both ,but problem not solved.

1 response

Answer 1 / 1
melodyfive Posts 25 Registration date Saturday September 6, 2008 Status Member Last seen June 10, 2009 13
Sep 25, 2008 at 04:50 AM
hello,

maybe you having problems with the motherboard and try to unplug all the devices keeping only the cpu, the motherboard and the rams on it and see if it powers on. if not then surely it must be coming from the motherboard.

Similar discussions

No display on monitor, light blinks
Harsh20_4 -
Anonymous -

Hello,

Yesterday, I was thinking of upgrading my RAM. I bought 512 MB SD RAM, but when I opened my CPU I realized that I am not sure if my machine has SD RAM in it. So, I didn't put the new RAM. I then tried to switch on the machine to run some utility for checking my RAM type.

Unfortunately, when I switched on my machine, my display didn't come up. Now, I am having no clue what went wrong as everything looks fine but there is no display.

When I disconnected my monitor from the CPU, I get a test message as no signal. My monitor looks fine. Please help in sorting the issue out.

Thanks in advance.

Regards,
Syste...

9 responses
3 beeps no display on monitor
Yousaf khan -
mohdayman000 -

Hello,
I have a computer which has stoped working. There is no display on monitor the computer beeps three times, I reseted ram, video card and all other things but still it is not workin Note (the computer was working fine but last night it stoped working suddenly), please help me.

15 responses
Computer turns on but no display
Lancenz -
Lancenz -

Hello

Having a bit of a problem with my pc. Basically, my computer turns on but there is no display on the monitor. I fixed this by replacing the CMOS battery and this went good for like 2 months or so. The problem started when it happened again so I again replaced the battery. This fix only lasted like 2 weeks and now it's happened again. What I do at the moment to access my computer is take out the CMOS for like 5 mins and put it again. This seems to fix the problem but after a day the problem shows up again. I'm getting sick of doing this process every single day so I would like to know what is happening with my pc. Do you guys think this is due to a faulty mobo? Any help w...

2 responses
monitor light blinking,no display
md -
ac3mark -

Hello everyone...
Whenever I switch on my computer, monitor light is just blinking & no display.. I thought it might be because of RAM.. But when I changed my computer's RAM , same problem arises.. And whenever i remove VGA cable from the CPU my monitor just blinks & displays "Cable not connected."
Please someone tell me what to do now...

5 responses
My computer beeps 3 times and monitor has no signal!!
Etsuko steal ayumi -
wes12 -

Hello,
hey I have a dell dimension 4400 and I just got his new video card called ati radeon 9700 and I opened up my pc and swiched that video card with the old one I had ! and I took the molex connecter ithnk called p7 andi plugged on the side of my video card and closed my computer and plugged everything in and all of a sudden I plug in the power supply and the screen says no signal and the pc beeps three times ! I don't know what that means I mean I haven't touched anything else but the molex connecter ! SOI COULDN'T BE ANY THING ELSE besides the fact I have to get a new power supply!ANYWAY PLEASE HELP!!!!!!!!

8 responses