E72 doesn't register memory card
Solved/Closed
Related:
- E72 doesn't register memory card
- Network card - Guide
- Flash drive/card tester - Download - Backup and recovery
- Clear virtual memory - Guide
- Vgcore out of memory ✓ - Hardware Forum
- Photoshop not enough memory available - Guide
3 responses
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Aug 21, 2010 at 07:01 AM
Aug 21, 2010 at 07:01 AM
Hello,
Try this 1.
Check whether the files are not in hidden mode.
Connect it to your PC and follow the instructions.
Click on "Start" -->Run-->type cmd and click on OK.
Command prompt will be opened.
Here I assume your memory card drive letter as G:
Enter this command.
attrib -h -r -s /s /d g:\*.*
Press "Enter".
Note : Replace the letter g with your memory card drive letter.
Now check your memory card for the files.
Good Luck.
Try this 1.
Check whether the files are not in hidden mode.
Connect it to your PC and follow the instructions.
Click on "Start" -->Run-->type cmd and click on OK.
Command prompt will be opened.
Here I assume your memory card drive letter as G:
Enter this command.
attrib -h -r -s /s /d g:\*.*
Press "Enter".
Note : Replace the letter g with your memory card drive letter.
Now check your memory card for the files.
Good Luck.
Worked like a charm, thanks. :)
I was really pissed off because of this, you saved me.
I still do not understand how that happened.
I was really pissed off because of this, you saved me.
I still do not understand how that happened.
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Aug 21, 2010 at 09:02 PM
Aug 21, 2010 at 09:02 PM
Hello,
Download "Malwarebytes' Anti-Malware" from the below link
https://ccm.net/downloads/security-and-maintenance/4621-malwarebytes-anti-malware/
Update it and perform "Full Scan".
Note : Default selected option is "Quick Scan".
Also update your Anti-virus and scan your PC.
Good Luck.
Download "Malwarebytes' Anti-Malware" from the below link
https://ccm.net/downloads/security-and-maintenance/4621-malwarebytes-anti-malware/
Update it and perform "Full Scan".
Note : Default selected option is "Quick Scan".
Also update your Anti-virus and scan your PC.
Good Luck.
hi, this happen to my e72 too, i had tried to format the memory card but message prompt write protected, then i tried remote access message, it still prompt message require (it doesnt change the password automatically) , i also tried copy and paste ur above solution, but message path not found (I have change the letter to drive letter), seek your advice.
Feb 29, 2012 at 12:32 AM
Thank you