Computer boots but no response on monitor??
Closed
oreoholic
Posts
1
Registration date
Monday November 28, 2011
Status
Member
Last seen
November 28, 2011
-
Nov 28, 2011 at 04:19 PM
PETERFRITZ Posts 4 Registration date Wednesday December 7, 2011 Status Member Last seen December 7, 2011 - Dec 7, 2011 at 09:18 PM
PETERFRITZ Posts 4 Registration date Wednesday December 7, 2011 Status Member Last seen December 7, 2011 - Dec 7, 2011 at 09:18 PM
Related:
- Computer boots but no response on monitor??
- No signal on monitor but cpu running - Guide
- Facebook review requested but no response - Guide
- Computer turns on but no display on monitor - Guide
- Pixio monitor no signal - Monitor Forum
- Arzopa portable monitor no signal - Monitor Forum
1 response
PETERFRITZ
Posts
4
Registration date
Wednesday December 7, 2011
Status
Member
Last seen
December 7, 2011
Dec 7, 2011 at 09:18 PM
Dec 7, 2011 at 09:18 PM
hi,
Try this..it works evrytime for me...i am an IT Grad in thePhils.
Just want to share my experience.
if your computer boots ok.
if all the fans is doing well.
and all connections are checked ok...
sometimes it is caused by the dust and constant heat inside the unit
that causes it to moisten and cause dust to block connections...
Turn off your computer.unplug the main cord first.(safety first)
open your pc then pull out the ram and try cleaning the ram slot with a paint brush clean it thoroughly.and also the ram with a pencil eraser...
and detach the DVD/CDROM and the Floppy Disk Drive...
and then after cleaning the ram slot and the ram..put it back together..then check the 2 yellow and 2 black wires near the cpu...if it is connectd properly.
dont put back the DVD/CDROM and FLoppy Drive yet..just the memory..
Then put all your connections back the mouse and the keyboard and the VGA and power cord must be checked if properly connected.
Then Turn on your PC..
it works every time here for us..hope this works..for more help just email me at Email Id remove for security
Try this..it works evrytime for me...i am an IT Grad in thePhils.
Just want to share my experience.
if your computer boots ok.
if all the fans is doing well.
and all connections are checked ok...
sometimes it is caused by the dust and constant heat inside the unit
that causes it to moisten and cause dust to block connections...
Turn off your computer.unplug the main cord first.(safety first)
open your pc then pull out the ram and try cleaning the ram slot with a paint brush clean it thoroughly.and also the ram with a pencil eraser...
and detach the DVD/CDROM and the Floppy Disk Drive...
and then after cleaning the ram slot and the ram..put it back together..then check the 2 yellow and 2 black wires near the cpu...if it is connectd properly.
dont put back the DVD/CDROM and FLoppy Drive yet..just the memory..
Then put all your connections back the mouse and the keyboard and the VGA and power cord must be checked if properly connected.
Then Turn on your PC..
it works every time here for us..hope this works..for more help just email me at Email Id remove for security
