Netgear Router
Solved/Closed
Minbu
Posts
1
Registration date
Wednesday January 23, 2013
Status
Member
Last seen
January 23, 2013
-
Jan 23, 2013 at 06:47 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jan 23, 2013 at 09:39 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jan 23, 2013 at 09:39 AM
Related:
- Netgear Router
- Netgear router login - Guide
- Netgear genie - Download - Remote access
- Linksys router password not working - Guide
- Virtual wifi router - Download - Remote access
- Bsnl router default password ✓ - Network Forum
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Jan 23, 2013 at 09:39 AM
Jan 23, 2013 at 09:39 AM
Hello,
Try this 1
Click on Start --> Type cmd and press Enter. "Command Prompt" will be opened.
Enter the below command.
ipconfig --> Press Enter.
Check your "Default Gateway" IP. Try logging into the router using that IP.
If the user name and password doesn't work then someone might have changed
the user name, password and as well as the default IP. You need to reset
your router. You can find the reset button at the back of your router. You can
use paperclip to push the button. When your router is ON, just hold the reset
button for 30 secs and release it. It will reboot on its own.
(Note : It will clear all the settings you have configured in the router.)
After resetting connect to your router (through wired) and then configure the
settings. You can download the manual from the manufacture website and follow
the instructions to configure your router again.
Good Luck
Try this 1
Click on Start --> Type cmd and press Enter. "Command Prompt" will be opened.
Enter the below command.
ipconfig --> Press Enter.
Check your "Default Gateway" IP. Try logging into the router using that IP.
If the user name and password doesn't work then someone might have changed
the user name, password and as well as the default IP. You need to reset
your router. You can find the reset button at the back of your router. You can
use paperclip to push the button. When your router is ON, just hold the reset
button for 30 secs and release it. It will reboot on its own.
(Note : It will clear all the settings you have configured in the router.)
After resetting connect to your router (through wired) and then configure the
settings. You can download the manual from the manufacture website and follow
the instructions to configure your router again.
Good Luck
