Joystick(unknown device)
Closed
boazoland
Posts
34
Registration date
Friday October 5, 2012
Status
Member
Last seen
March 28, 2017
-
Jun 14, 2013 at 07:42 PM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jun 14, 2013 at 10:07 PM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jun 14, 2013 at 10:07 PM
Related:
- Joystick(unknown device)
- Unknown sender sms android - Guide
- Synaptics pointing device driver - Guide
- Ati hdmi audio device - Download - Drivers
- Generic usb joystick driver - Download - Drivers
- Can't ping device on same network - Guide
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Jun 14, 2013 at 10:07 PM
Jun 14, 2013 at 10:07 PM
Hello,
Try this 1.
1) Try reinstalling \ updating your USB drivers. You can download the drivers
from the manufacture website. Now try connecting your memory stick.
2)Turn off your computer---> Unplug the power cord of your computer for about
15 minutes --> Plug the power cables back --> Switch ON your computer.
The reason is the windows keeps the USB devices cache stored in some chip.
When some entry goes wrong, it remains there and sometimes will not get
flushed even on shutting down the your computer. So removing the power cord
for few minutes results in discharge completely and the entries are freshly
created.
3) Click on Start --> Run --> Type services.msc and press Enter.
Scroll down for "Universal Plug and Play Device Host", double click on it
and set "Startup type" as "Automatic" ---> Click on Start ---> Click on OK.
Look for "Windows Management Instrumentation", double click on it and set
"Startup type" as "Automatic" ---> Click on Start ---> Click on OK.
4) Click on this link and follow the instructions in "Method 3"
https://support.microsoft.com/en-us
Good Luck.
Try this 1.
1) Try reinstalling \ updating your USB drivers. You can download the drivers
from the manufacture website. Now try connecting your memory stick.
2)Turn off your computer---> Unplug the power cord of your computer for about
15 minutes --> Plug the power cables back --> Switch ON your computer.
The reason is the windows keeps the USB devices cache stored in some chip.
When some entry goes wrong, it remains there and sometimes will not get
flushed even on shutting down the your computer. So removing the power cord
for few minutes results in discharge completely and the entries are freshly
created.
3) Click on Start --> Run --> Type services.msc and press Enter.
Scroll down for "Universal Plug and Play Device Host", double click on it
and set "Startup type" as "Automatic" ---> Click on Start ---> Click on OK.
Look for "Windows Management Instrumentation", double click on it and set
"Startup type" as "Automatic" ---> Click on Start ---> Click on OK.
4) Click on this link and follow the instructions in "Method 3"
https://support.microsoft.com/en-us
Good Luck.
