Tried clear cmos w/jumper = no good!

Closed

Mike.Digital - Jul 5, 2010 at 10:51 PM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jul 6, 2010 at 01:46 PM

Hello,

I had a problem with my computer and a co-worker told me to clear the bios using the clear cmos jumper. He told me to move the jumper and turn the computer on/off and move the jumper back... Now when I turn it on the screen stays blank and the computer just makes these long beeping sounds... what happened and how do I fix it?

Tried clear cmos w/jumper = no good!
Cmos checksum error - Guide
Dns jumper - Download - Other
Bios/cmos password recovery tool - Download - Other
Pc only boots after cmos reset - Hardware Forum
Cmos battery - Guide

1 response

Answer 1 / 1

jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Jul 6, 2010 at 01:46 PM

Hi,

try this 1

Remove the RAM from the slot, clean it and place it back properly or place it

in another slot.

Similar discussions

Computer turns on but no display

Can't find my cmos battery

Checksum error / Cmos Default value / BIOS Setup Options

Computer boot but no signal on monitor

cmos battery

Similar discussions

Subscribe To Our Newsletter!