Help to open usb hard drive
Closed
laura
-
Jun 18, 2009 at 12:28 PM
moulkou Posts 32 Registration date Tuesday December 30, 2008 Status Member Last seen July 21, 2009 - Jun 18, 2009 at 01:01 PM
moulkou Posts 32 Registration date Tuesday December 30, 2008 Status Member Last seen July 21, 2009 - Jun 18, 2009 at 01:01 PM
Related:
- Help to open usb hard drive
- Usb flash drive tester - Download - Backup and recovery
- Usb show - Download - Backup and recovery
- How to install a second hard drive windows 11 - Guide
- Hard drive regenerator - Download - Backup and recovery
- Wd drive unlock - Guide
1 response
moulkou
Posts
32
Registration date
Tuesday December 30, 2008
Status
Member
Last seen
July 21, 2009
8
Jun 18, 2009 at 01:01 PM
Jun 18, 2009 at 01:01 PM
Hye you can try doing this:
In the Control Panel..
Double-click Administrative Tools,
Click Computer Management
Click Disk Management.
-If the drive is external, it is necessary to partition and then format it so that it appears in the workstation.
-See here: New hard drive: what to do?
If the disc does not appear:
-Test with another USB cable
-Try unplugging the drive, turning it off, reconnect, then turn it on
-Install the latest drivers from the motherboard, including the USB drivers!
-Check on the website of the manufacturer of the hard drive if there are no special drivers. Check also if it does not have a section with answers to frequently asked questions (FAQ)
-Check (if possible) the position of the rider in the rack (Sata1/Sata2 for a SATA disk) or the master position (IDE Disk)
-Plug the box's hard drive directly on the motherboard to check if the failure is due to camera or hard drive
In the Control Panel..
Double-click Administrative Tools,
Click Computer Management
Click Disk Management.
-If the drive is external, it is necessary to partition and then format it so that it appears in the workstation.
-See here: New hard drive: what to do?
If the disc does not appear:
-Test with another USB cable
-Try unplugging the drive, turning it off, reconnect, then turn it on
-Install the latest drivers from the motherboard, including the USB drivers!
-Check on the website of the manufacturer of the hard drive if there are no special drivers. Check also if it does not have a section with answers to frequently asked questions (FAQ)
-Check (if possible) the position of the rider in the rack (Sata1/Sata2 for a SATA disk) or the master position (IDE Disk)
-Plug the box's hard drive directly on the motherboard to check if the failure is due to camera or hard drive
