No display on first boot
Closed
arunxv
Posts
2
Registration date
Friday July 10, 2020
Status
Member
Last seen
July 11, 2020
-
Updated on Jul 10, 2020 at 10:07 PM
arunxv Posts 2 Registration date Friday July 10, 2020 Status Member Last seen July 11, 2020 - Jul 11, 2020 at 02:38 AM
arunxv Posts 2 Registration date Friday July 10, 2020 Status Member Last seen July 11, 2020 - Jul 11, 2020 at 02:38 AM
Hello
am using a gigabyte h110 m s2 mtherboard and intel i3 6100. Recently i got a asus gtx 660 ti. I installed it and intially i didnt get a display from the monitor, but it was booting ( i checked the numlock key and capslock). So i restarted the pc and the monitor gave display. I am using an hdmi cable. I tried with dp cables too. This keeps on happening every morning when i turn on my pc. What seems to be the issue? Can any one help me?
am using a gigabyte h110 m s2 mtherboard and intel i3 6100. Recently i got a asus gtx 660 ti. I installed it and intially i didnt get a display from the monitor, but it was booting ( i checked the numlock key and capslock). So i restarted the pc and the monitor gave display. I am using an hdmi cable. I tried with dp cables too. This keeps on happening every morning when i turn on my pc. What seems to be the issue? Can any one help me?
Related:
- First boot no display hdmi
- Hiren boot cd 17.2 iso download - Download - Backup and recovery
- Boot camp assistant download - Download - Virtualization
- Ps3 hdmi reset - Guide
- Ati hdmi audio device - Download - Drivers
- Computer beeps 3 times no display ✓ - CPU & Desktop Forum
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Jul 11, 2020 at 01:40 AM
Jul 11, 2020 at 01:40 AM
Hello,
Try this 1
Check your RAM.
1) Remove your RAM from the slot --> Clean it and place it back again.
2) If you are having two RAM, then remove one RAM and place it in the slot. If the issue still exits then try another slot.
3) Try the above with the 2nd RAM as well.
Good Luck
Try this 1
Check your RAM.
1) Remove your RAM from the slot --> Clean it and place it back again.
2) If you are having two RAM, then remove one RAM and place it in the slot. If the issue still exits then try another slot.
3) Try the above with the 2nd RAM as well.
Good Luck
Jul 11, 2020 at 02:38 AM