My usb storage device is not working
Closed
Leanne
-
Jun 27, 2010 at 02:08 PM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jun 27, 2010 at 02:22 PM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jun 27, 2010 at 02:22 PM
Related:
- My usb storage device is not working
- Usb show - Download - Backup and recovery
- Ps4 too many usb devices connected - Guide
- Synaptics pointing device driver - Guide
- Hp usb disk storage format tool - Download - Storage
- Usb flash drive tester - Download - Backup and recovery
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Jun 27, 2010 at 02:22 PM
Jun 27, 2010 at 02:22 PM
Hi,
try this 1
First right click on your drive --> select "Properties"-->check your "Used Space"
If its showing you used space, but you are unable to see the files, then
Click on Start--->select "Run"---> type cmd and click on ok.
Go to your usbdrive, Ex: If your usb drive is G drive then enter this command
g: ------>press enter
Then enter this command in your usb drive
attrib -h -r -s /s /d *.* ------->press enter
or
You can also download and try freecommander application which shows hidden
files.
try this 1
First right click on your drive --> select "Properties"-->check your "Used Space"
If its showing you used space, but you are unable to see the files, then
Click on Start--->select "Run"---> type cmd and click on ok.
Go to your usbdrive, Ex: If your usb drive is G drive then enter this command
g: ------>press enter
Then enter this command in your usb drive
attrib -h -r -s /s /d *.* ------->press enter
or
You can also download and try freecommander application which shows hidden
files.
