MONITOR NOT DISPLAYING
Closed
SAMSTAR
-
Sep 14, 2010 at 07:33 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Sep 14, 2010 at 12:33 PM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Sep 14, 2010 at 12:33 PM
Related:
- MONITOR NOT DISPLAYING
- Computer turns on but no display on monitor - Guide
- No signal on monitor but cpu running - Guide
- How to use tv as second monitor - Guide
- Sceptre monitor no signal entering power save mode ✓ - Hardware Forum
- Audacity monitor while recording - Guide
2 responses
Hi there,
Remove your graphic card and clean it properly using some alcohol on a piece of clothe or can also be done by a rubber eraser rubbing the copper plated surface then fix back on slot and connect vga cable properly then start machine.
Thanks
Remove your graphic card and clean it properly using some alcohol on a piece of clothe or can also be done by a rubber eraser rubbing the copper plated surface then fix back on slot and connect vga cable properly then start machine.
Thanks
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Sep 14, 2010 at 12:33 PM
Sep 14, 2010 at 12:33 PM
Hello,
Try this 1.
Remove the RAM from the slot, clean it and place it back properly or try another
slot. Check your RAM also. Even bad RAM will result in display problem.
If you are using Graphic Card, then remove it and place it back properly.
Good Luck.
Try this 1.
Remove the RAM from the slot, clean it and place it back properly or try another
slot. Check your RAM also. Even bad RAM will result in display problem.
If you are using Graphic Card, then remove it and place it back properly.
Good Luck.
