Compaq 610 on and off immediately
Closed
Ben
-
Jan 17, 2011 at 10:07 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jan 17, 2011 at 11:13 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jan 17, 2011 at 11:13 AM
Related:
- Compaq 610 on and off immediately
- Epson perfection 610 driver windows 10 - Download - Drivers
- Compaq laptop not starting up but power light is on ✓ - Laptop Forum
- No bootable device compaq laptop ✓ - Hardware Forum
- Compaq cq58 factory reset ✓ - Hardware Forum
- Compaq presario v2000 drivers ✓ - Audio Forum
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Jan 17, 2011 at 11:13 AM
Jan 17, 2011 at 11:13 AM
Hello,
Try this 1
Clean all the vents, blow out with canned air.
Remove the power adapter and the battery from your laptop. Open the laptop
case to access the CPU Fan and the heat sink. Remove all the dust from the Fan
and also from the heat sink. Never run your laptop on bag & bed. Sides, back and
bottom must be clear.
If possible remove the old thermal paste from the CPU and apply a new thermal
paste better heat conductivity.
Good Luck
Try this 1
Clean all the vents, blow out with canned air.
Remove the power adapter and the battery from your laptop. Open the laptop
case to access the CPU Fan and the heat sink. Remove all the dust from the Fan
and also from the heat sink. Never run your laptop on bag & bed. Sides, back and
bottom must be clear.
If possible remove the old thermal paste from the CPU and apply a new thermal
paste better heat conductivity.
Good Luck
