Related:
- Sandisk memory card not format
- Could not complete this operation. there was not enough memory available - Guide
- Network card - Guide
- Clear virtual memory - Guide
- Flash drive/card tester - Download - Backup and recovery
- Format factory - Download - Other
2 responses
xpcman
Posts
19528
Registration date
Wednesday October 8, 2008
Status
Contributor
Last seen
June 15, 2019
1,825
May 29, 2011 at 01:34 PM
May 29, 2011 at 01:34 PM
Sounds like a hardware error if it can't format. Even if you could format it. the data may be lost in the future. I suggest you buy a new one.
Good Luck
Good Luck
Anonymous User
May 29, 2011 at 04:05 PM
May 29, 2011 at 04:05 PM
Greetings,
Did you use a format tool like hp disk format tool? It's available for download on link below:
https://ccm.net/downloads/tools/4639-hp-usb-disk-storage-format-tool/
Plug your memory card into your computer and let it detect it then format the drive after detection.
See if you can open the memory card after that. Let me know if the problem is solved or not.
Did you use a format tool like hp disk format tool? It's available for download on link below:
https://ccm.net/downloads/tools/4639-hp-usb-disk-storage-format-tool/
Plug your memory card into your computer and let it detect it then format the drive after detection.
See if you can open the memory card after that. Let me know if the problem is solved or not.