COMPAQ EVO D500

Solved/Closed
traktori Posts 65 Registration date Thursday 16 April 2009 Status Member Last seen 26 January 2015 - 25 Jul 2012 à 19:35
 ouma - 10 Mar 2014 à 16:32
Hello,i have a compaq evo d500 it worked before one week but not now.]
I started it but no display i changed graphic card its the same pls help me pls.

1 response

jack4rall Posts 6428 Registration date Sunday 6 June 2010 Status Moderator Last seen 16 July 2020
26 Jul 2012 à 05:34
Hello,

Try this 1

If you notice that your CPU fan is running but there is no display in the screen,

then remove the RAM from the slot, clean it and place it back properly or try

another slot. Check your RAM also. Even bad RAM will result in display problem.

Once again remove the graphic card from the slot and place it back properly.

Good Luck.
traktori Posts 65 Registration date Thursday 16 April 2009 Status Member Last seen 26 January 2015
26 Jul 2012 à 20:27
yes my fan is running i checked ram replaceed with another and changed graphic card but no display again ? ?
jack4rall Posts 6428 Registration date Sunday 6 June 2010 Status Moderator Last seen 16 July 2020
27 Jul 2012 à 04:08
Hello,
Try this 1
Reset your BIOS settings
Turn off your PC and remove the power chord --> Open the cabinet --> Remove the CMOS battery for 15-30 minutes and then put it back properly. Now plug the power cord back in and switch ON your PC.
Click on the below hyperlink "CMOS Battery" if you don't have any idea about the CMOS battery
CMOS Battery
If the problem still exist, click on the below link and follow the instructions in "Hardware Reset".
https://ccm.net/faq/1192-lost-bios-password-resetting-the-bios
Good Luck
traktori Posts 65 Registration date Thursday 16 April 2009 Status Member Last seen 26 January 2015
28 Jul 2012 à 13:59
i know what is cmos battery but not have tryed i will try and tell what happened again
traktori Posts 65 Registration date Thursday 16 April 2009 Status Member Last seen 26 January 2015
2 Aug 2012 à 18:12
i tryed this but nothing happened its same ??
jack4rall Posts 6428 Registration date Sunday 6 June 2010 Status Moderator Last seen 16 July 2020
3 Aug 2012 à 05:33
Hello,
Try this 1
Connect your monitor to the onboard VGA and check if you are able to get the display or not.
Good Luck