Acer aspire one d250 wont start
Closed
aKurtabegu
Posts
1
Registration date
Thursday August 29, 2013
Status
Member
Last seen
August 29, 2013
-
Aug 29, 2013 at 02:43 AM
Zohaib R Posts 2368 Registration date Sunday September 23, 2012 Status Member Last seen December 13, 2018 - Sep 5, 2013 at 04:50 PM
Zohaib R Posts 2368 Registration date Sunday September 23, 2012 Status Member Last seen December 13, 2018 - Sep 5, 2013 at 04:50 PM
Related:
- Acer aspire one d250 wont start
- Acer aspire 3 keyboard light - Guide
- Acer aspire one wifi driver - Download - Drivers
- Acer bluetooth driver - Download - Drivers
- Start survey - Download - Horror
- Acer aspire lite 15 keyboard light - Laptop Forum
1 response
Zohaib R
Posts
2368
Registration date
Sunday September 23, 2012
Status
Member
Last seen
December 13, 2018
69
Sep 5, 2013 at 04:50 PM
Sep 5, 2013 at 04:50 PM
Hi aKurtabegu,
There is a possibility during re-assembling the parts were not put together correctly. The symptoms indicate that computer is failing to start Power On Self Test (POST) process. Try to re-seat the memory modules in the computer and check. If the problem still persists disconnect each component one by one and then re-connect them. After re-assembling if the issue still persists please contact Acer Support for further troubleshooting.
Note: The steps above require you to re-seat the components by removing the system cover/taking apart the chassis. Please perform these steps only if you are comfortable else seek a technician's help. Also, refer to the Service Manual for accurate steps and safety instructions.
There is a possibility during re-assembling the parts were not put together correctly. The symptoms indicate that computer is failing to start Power On Self Test (POST) process. Try to re-seat the memory modules in the computer and check. If the problem still persists disconnect each component one by one and then re-connect them. After re-assembling if the issue still persists please contact Acer Support for further troubleshooting.
Note: The steps above require you to re-seat the components by removing the system cover/taking apart the chassis. Please perform these steps only if you are comfortable else seek a technician's help. Also, refer to the Service Manual for accurate steps and safety instructions.
