Previous Topic Next Topic

VGA Driver for ZX-I945LM4

Closed
Nitin - Feb 10, 2015 at 05:39 AM
 Nitin - Feb 10, 2015 at 09:15 AM
BIOS: MotherBoard Version: ZX-I945LM4 Ver: 1.5 BIOS SIZE: 4M Date: 01/15/09

i have the cd, But I dont know which VGA driver need be to install.

Actually its been 4 yr, I didnt need to format my desktop.

I have tried to follow below steps. But its didnt help.

On the desktop or in the Start menu, right-click on My Computer and select Properties.
You can also open the Control Panel and double-click the System icon.
In the System Properties window, click the Hardware tab.
On the Hardware tab, click the Device Manager button and all that. But didnt located my correct VGA driver.

Thanks in advance for all who help, or read my problem.

1 response

Answer 1 / 1
Ambucias Posts 47310 Registration date Monday February 1, 2010 Status Moderator Last seen February 15, 2023 11,166
Feb 10, 2015 at 05:50 AM
Hi

I suggest you use this free software to locate and install your driver:

https://ccm.net/downloads/security-and-maintenance/7151-slimdrivers/

Good luck
Nitin
Feb 10, 2015 at 09:15 AM
Thanks a lot,,I will definitely try and revert you.

Similar discussions

Can't find my cmos battery
Kiwi137 -
Kiwi137 -


There are two perpendicular boards.
I'm doing this on my phone, hope the pictures do show

3 responses
No Timer Tick interrupt
HackCMD -
ac3mark -

Hello,


Hi I have problem with Dell gx280 when I power on it beeps error 4X then it show's








NO TIMER TICK INTERRUPT

1 response
My computer beeps 3 times and monitor has no signal!!
Etsuko steal ayumi -
wes12 -

Hello,
hey I have a dell dimension 4400 and I just got his new video card called ati radeon 9700 and I opened up my pc and swiched that video card with the old one I had ! and I took the molex connecter ithnk called p7 andi plugged on the side of my video card and closed my computer and plugged everything in and all of a sudden I plug in the power supply and the screen says no signal and the pc beeps three times ! I don't know what that means I mean I haven't touched anything else but the molex connecter ! SOI COULDN'T BE ANY THING ELSE besides the fact I have to get a new power supply!ANYWAY PLEASE HELP!!!!!!!!

8 responses
HELP! I MAY HAVE KILLED MY MEMORY MOTHERBOARD 3 LONG BEEPS
malicialove -
jack4rall -

I honestly dont know much about computers and so wanted to learn more and read somewhere that I need to clean the cpu once in a while. Mine was absolutely covered in clouds of dust. So I begun cleaning with a dry cloth and some compressed air. Then I put everything back together and my computer wouldnt start!!! Instead makes 3 long beeps, pauses and then beeps again endlessly until disconnected from the wall.
I read that 3 long beeps mean memory failure and so took the memory out without touching the metal prangs and put it back in and it wouldnt solve the problem!!! It keeps beeping.
I think I may have killed it because afterwards I read that you shouldnt do this with a carp...

3 responses
maximum RAM capacity in intel 845GV MotherBoard
Kushan -
Zohaib R -

pc is very slow
what is the maximum RAM capacity & Processor type to Intel 845GV MotherBoard ?

3 responses
SATA HDD not detected in bios. But sometimes it does.
firewolf123 -
User -

Hello,
recently my pc has started malfunctioning. windows will not boot! when I enter setup (bios) I cant see my hdd. sometimes its there and sometimes not! when I boot to repair disk (when the hdd is detected) and run startup repair it shows like this : "root cause found : the partion table does not have a valid system partition". and sometimes (when hdd is not detected) it shows: system repair cant resolve this issue. in diskpart I cant see my drives. anyway I decided to run super fdisk to correct my partion table. but when I boot to it, it does not detect a hdd. also I did a change in the bios I changed the sata controller from ACHI TO ATA. but when I tried ACHI it does not detect...

23 responses